Jump to content

OPEN FACE CHANNEL LETTERS

Integrating Neon in your Electric Sign is one of our specialties. Good processed Neon should last easily 20 years when processed correctly and very efficient light average at just 3 watts per linear foot. Neon cannot be duplicated by appearance, longevity, or light output by LED's

Having the "Know How" makes the difference between staying Maintenance Free, or becoming a Maintenance Nightmare
Our Signs

REVERSE (HALO) CHANNEL LETTERS

Halo illuminated letters don't offer a loud in your face signage but instead are a elegant, classy, and subtle signage. Can be illuminated by Neon, or LED Light Sources.

All Our Electric Signs come with a 5 Year Worry Free Electrical Warranty. The state of California only demands 1 year.
Our Signs

This is Your Sign

DIMENSIONAL SIGNAGE

Dimensional lettering & Logo's for your interior or exterior signage needs.

We can fabricate & install your company's logo or branding for just about any application & identification
Our Signs

LOBBY SIGNS

Internal illuminated lobby signage for your office or lobby. We can replicate your company's logo or identification and illuminate it to impress your visitors and customers.

All Our Electric Signs come with a 5 Year Worry Free Electrical Warranty. The state of California only demands 1 year.
Our Signs

GROUND SIGNS

Ground Signs for your business or shopping center. Illuminated or non-illuminated. We will fabricate & install your ground signs for identification or direction.

All Our Electric Signs come with a 5 Year Worry Free Electrical Warranty. The state of California only demands 1 year.
Our Signs
News Ticker
  • News ticker sample
  • News ticker sample
Sign in to follow this  
westco5

Moonshine Beach - Pacific Beach

Recommended Posts

MOONSHINE BEACH

Located right in central Pacific Beach, a community in San Diego

Moonshine Flats opened up a sister location similar to the East Village location.  Bar, club...food, and of course live country music bands perform.  Similarly to Moonshine Flats, Moonshine Beach transformed The Typhoon Saloon and Fred's Mexican Food. 

Originally this building was a bowling alley, guess not many knew Pacific Beach had a bowling alley.  

The change of theme by ownership brought the first Country Music venue to Pacific Beach

One difference Moonshine Beach will have that Moonshine Flats didn't, is adding in four decorative huge 8 Cold Cathode (Neon) Stars for decorative lighting. 

One important aspect we did for these lighting star structures was paint them a textured flat Matthews PPG Paint finish so the Lamps will not reflect off of them, that way the light sinks right into the background and the Cold Cathode Lamps stay defined and not fuzz in the evening sky

Loading up and getting ready to install

Moonshine Beach 1.JPG

 

Moonshine Beach 2.JPG

Originally the stars were going to be Red, White, and Blue but it was thought that it might be too loud and take away from the Moonshine Beach sign.  The desire was something more subtle, so to match the sign it's self the deco Neon lamps were 18mm 4500 Tri-Phoshor Lamps

Moonshine Beach 3.JPG

And time for a selfie

Moonshine Beach 4.jpg

Prepping the new Moonshine Beach sign for install.  Both sign configurations and theme are one of the same, just from Flats to Beach.

Moonshine Beach 5b.JPG

 

Moonshine Beach 5.jpg

INSTALL DAY

Moonshine Beach 6.JPG

 

Moonshine Beach 7.JPG

 

Moonshine Beach 8.JPG

 

Moonshine Beach 9 .JPG

Selfie 2 :lol:

Moonshine Beach 10.jpg

....and done!

Moonshine Beach 11.JPG

Just as stated in our article on Moonshine Flats

Quote

..."The object was to emphasize the name "Moonshine Flats" and make a subtle white border.  We didn't want to overwhelm the name with a bright white border so we changed the typical white 6500 Kelvin to something slightly warmer in color, so for this the border was called out to a Tri-Phosphor 4500K. 

The Ruby Red Lettering was created in 12mm, a very thin tube that would be intense for a good light output, so not to compete too much with a bright white out outer border tube was created in 18mm.

The thinner the diameter tube the brighter the lamp will be, the larger the more subtle.  This was a very good combination with a very good end result."...

Now Pacific Beach has a new bright city night scape to light up the sky. 

 

West Coast Sign Company, San Diego CA, 92131 (858) 689-0080 • info@westcoastsignco.com

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Similar Content

    • By westco5
      MOONSHINE FLATS
      Located in East Village Downtown San Diego that borders the Gas Lamp District.
       
      This is a project and revamp where the bar/club owners decided to change the theme of their existing venue.  One of my favorite little Neon Signs was going to be removed to make way for the much larger sign for this new Country Theme Bar & Club with live music....Moonshine Flats.

      After obtaining approvals from CCDC, Historic, and sign permits from the City of San Diego we began production.
      This was going to be an "old school" sign, so that meant old school production and look with state of the art Neon components.  That meant the sign structure would be American Steel.  Not your normal steel but "Jet Plated" metal which is basically galvanized like plate/finish for durability.

       

      As you can tell from the image, these letters are NOT easy to cut, bend and weld.  The smaller the letter the more your fingers will hate you.

      Some times the "old school" components are one of the best.  These are porcelain housings.  Most custom sign shops who still produce electric Neon signs shy away from porcelain because their natural finish which is visible from the exterior is white and most will choose to use glass which will blend with the background.  We like white even though it may stick out like a sore thumb, I think it gives the Neon sign character.
      The problem with glass is, it's thin walled and won't stand up to high temperatures that porcelain can endure if needed.

      After a fresh paint job of PPG or better known in the sign industry as Matthews is one of the best commercial paint finishes that is equal to an automotive finish.

      With the face background it's best to ass the same color in Neon Glass.  Enter "Ruby Red", a premium Neon Glass tubing that can be pumped with Neon gas ( no mercury) or Mercury pumped.  After a side by side comparison our client decided to go with Mercury Pumped.

      The day before Installation it's a good idea to get all the holes drilled right and ready for that big day.

      Sometimes you even need the little helpers

      Install day, the part we can get up without the heavier equipment

       
      West Coast Sign Company, San Diego CA, 92131 (858) 689-0080 • info@westcoastsignco.com
       
    • By westco5
      Here's one of our favorite jobs that we produced and installed locally here in San Diego.
       
      RAY'S TENNIS
      located in Hill Crest close to downtown San Diego.
       
      So let's start from the beginning....
      This project starts with an old building that's about to get renovated. This landmark Tennis Store has been around the neighborhood since the 60's and Ray's Tennis is a very known location if you play tennis in San Diego.

      For a high light output green to match their colors we went with a very small millimeter diameter lamp glass made by Voltarc, 12mm Green.  The smaller the diameter Neon glass, the brighter the light output. 
      Our choice of high voltage secondary wire conductors is always the best....Silicone!  Silicone is the best quality for neon signs and it won't degrade as fast as conventional wiring

       

      One of the cool added parts of this jobs is the Stainless Steel overhang face they added for the renovation. Love the look, and we had a part to play to make sure it would make the single stroke of Voltarc's NeoBlue (Purple) pumped red would be applicable for installation.

      Doing a single stroke Neon border in this case Purple can sometimes be a challenge when it comes to installation but I made sure that the 56 liner feet would not be an issue. I wanted everything balanced for this project by NOT doing a conventional wiring installation for out long single lamp purple Neon.
      To do that the Neon transformer must be balanced, and that comes with installing the transformer in "Mid-Point Ground"  Something not many companies do, and one of the reasons why Neon can be problematic and cause multiple maintenance problems over time.  Most Neon issues happen at the hands of installation
      By doing a Mid-Point Return I turned this 15kv tranny into two separate 7,500kv's. Most importantly, I didn't run 20' of GTO (wiring) from Transformer Terminal to the outer most electrodes like you see in so many cases (Conventional Series Wiring) which result in numerous maintenance calls down the road. Doing a Mid-Point ground I started at the center of my Neon Load making my runs only 18" from the Transformer secondary Terminals to the first set of electrodes that will work their way out bringing the outermost lamps or connection back to the transformer. If you were to take a High Voltage Probe and measure at the Mid-Point ground terminal you would have about 0 volts. Doing the installation this way assures VERY long life with the secondary conductors as short as possible.
      CONVENTIONAL WIRING VS MID-POINT RETURN WIRING

      Here in the Transformer in a ventilated box which will breath much easier then the ones located behind the wall for the Lettering.  I have the two short secondary home runs splitting the 56' linear lamp foot load in half, with the return path coming from the outer most lamp connectors of the load. The Service Switch and double nutted ground with the panel ground at the bottom (structural) with the service ground which is the Transformer ground at the top. Before anyone asks, YES this is a shot before the Transformer box is sitting on top of treated studs!

      There are many Industry components used for our trade, a lot do not get used properly or are never used and again, this can be problematic for Neon Lighting & Signs when not properly used or installed.  Here is a good shot of outdoor wet location rated Neon electrode connections so no moisture gets in.

       

      Finishing up and closing out this deal

      And of course the final night shots

      The Tennis Ball we used a 15mm Tri-Phosphor White by Voltarc as well called "Tri-Lite"  Tri-Phosphors are a multi-blend of high quality phosphors that are about 40% brighter than conventional phosphor Neon caoted lamps and will stay whiter longer over time.  Reason being, when it comes to Hg (Mercury) filled lamps the mercury will crystallize and eventually eat through the phosphor which is what makes these lamps dim over time.

       
      What does this custom sign total cost of operation cost a consumer to run?
      Total package 784 watts, 8 hours per day @ 365 days a year roughly $.12kwh = $274.71 as an annual cost of operation for wall sign mixed in with some linear border tube lighting, NOT BAD!!
      Despite the popular mis-informed information about Lighting efficiency on Neon, we can see $274 a year operating for 8 Hours a day is NOT bad for electric advertising! 
       
      West Coast Sign Company, San Diego CA, 92131 (858) 689-0080 • info@westcoastsignco.com
       
       
       
×